CYLINDER PIPES
    •    diameter from 30 to 240mm
    •    material: 
        ◦    S355 (material no. 1,0570 BK+S)

MACHINE STEEL PIPES
    •    diameter from 80 to 240mm
    •    material: 
        ◦    S355 (material no. 1.0570)
        ◦    20MN V 6 (material no. 1.5217)

PISTON RODS
    •    diameter from 20 to 200mm
    •    material: 
        ◦    C45E (material no. 1.1191)
        ◦    42CrMo4 (material no. 1.7225)
        ◦    20MnV6 (material no. 1.5217)

ROUND STEEL
    •    diameter to 800mm  
    •    material: 
        ◦    S355 (material no. 1.0570)
        ◦    C45E (material no. 1.1191)
        ◦    42CrMo4 Q+T (material no. 1.7225 QT).

HEAVY PLATE CUT
    •    material strength from 20mm to 500mm
    •    material: 
        ◦    40CrMnMoS 8 6+QT (material no. 1.2312+QT)
        ◦    S355 (material no. 1.0570)
        ◦    C45E (material no. 1.1191)
        ◦    42CrMo4 Q+T (material no. 1.7225 QT)
        ◦    C40E (material no. 1.1186) 

CUT LINES
    •    material strength up to 300mm
    •    material: 
        ◦    S355 (material no. 1.0570)

HYDRAULIC PIPES
    •    diameter from 12 to 42mm
    •    material: 
        ◦    E235+N EN10305-4 ZIST (material no. 1.0308)
        ◦    V4A (material no. 1.4571, 1.4404, 1.4401)

 

STEEL CONSTRUCTION
    •    welded steel constructions.
    •    weight: up to 6,000kg
Vessels

PRESSURELESS TANKS
    •    laser-cutting, aligned and welded
    •    material: steel, stainless steel and aluminium.
Manufacturing components according to design

SHEET METAL CASING
    •    laser-cutting, aligned and welded
    •    material: steel, stainless steel and aluminium.

TURNED COMPONENTS
    •    diameter up to 1,200mm, length up to 8,000mm.
    •    material: steel, stainless steel and aluminium
milled components
    •    length up to 3,000mm, breadth up to 1,500mm, height up to 1,500mm
    •    material: steel, stainless steel and aluminium

VALVE BLOCKS
    •    weight from 1,000 kg to 12,000 kg
    •    material: steel, stainless steel and GGG40 casting
Plastic Parts
    •    injection moulded parts in PC, PA and ABS
    •    stamped- / milled components in PMMA and PVC

polish / honing / deep-hole drilling / surface treatments

E-Motors
    •    low-voltage motors
    •    special voltage motors
    •    explosion-protected motors

Pumps
    •    screw spindle pumps
    •    axial piston pumps
    •    radial piston pumps
    •    cogwheel pumps
    •    centrifugal pumps
    •    membrane pumps
    •    vane pumps

HEATING AND COOLING SYSTEMS
    •    plate heat exchangers
    •    oil heaters
    •    screw-in heaters
    •    oil/air coolers
    •    oil/water coolers
    •    pipe-bundle coolers

STORAGE UNIT TECHNOLOGY
    •    piston storage unit
    •    nitrogen vessels
    •    bubble storage unit
    •    membrane storage unit
    •    hydraulic dampers
    •    memory safety blocks
    •    accessories

CONNECTING SYSTEMS
    •    pump mounting brackets
    •    couplings
    •    foot flanges
    •    cushioning rings
    •    cushioning rails

VALVE TECHNOLOGY
    •    cartridge valves
    •    servovalves
    •    proportional valves
    •    pressure control valves
    •    flow control valves
    •    sandwich valves
    •    directional valves
    •    blocking valves
    •    mounting plates
    •    flow divider

MEASURING DEVICES          
    •    pressure measuring devices
    •    temperature measuring devices
    •    level indicators
    •    position and distance-measuring systems
    •    flow rate measurement

BEARINGS
    •    spherical bearings
    •    pivot heads
    •    ball bearings
    •    roller bearings
    •    friction bearings
    •    anti-friction bearings

Filter TECHNOLOGY
    •    pressure filters
    •    pipe filters
    •    anti-reflux filters
    •    ventilation filters

FLANGES
    •    pressure range: PN10 to PN64
    •    material: steel and stainless steel

SAE FLANGES
    •    pressure range: up to 400bar
    •    material: steel and stainless steel

SQUARE FLANGES
    •    pressure range: up to 600bar
    •    material: steel and stainless steel

HIGH PRESSURE BALL VALVES
    •    pressure range: up to 500bar
    •    material: steel and stainless steel

BLOCKING AND REGULATING FITTINGS
    •    pneumatic or electromechanically driven

PIPE CONNECTIONS
    •    material: steel and stainless steel

THICK-WALLED MOULDING PIECES
    •    material: ST52

    •    piston seals
    •    wipers
    •    rod seals
    •    v-rings
    •    piston rings
    •    o-rings
    •    backup rings
    •    radial seal rings
    •    rotor gaskets
    •    flat gaskets

    •    active construction elements
    •    passive construction components
    •    electromechanical construction elements
    •    optoelectronic construction elements
    •    finished cables
    •    EMS