Various others developments

Engine-Test Stand

for mechanical controllers

Features

  • Testing of mechanical controllers for large engines
  • Flexible testing of a wide variation of controller-types (hydraulic, mechanic, electric)
  • Compact design with integrated hydraulics, controls and HMI
  • Fully automated test run with possibilities for manual adjustments

Technische “Key-Performance”-Parameter

  • Control of pressure, flow, temperature
  • Frequency controlled motor revolution speed
  • Variable/Flexible electric connection of test devices

Testing of the "mudpumping effect" on train tracks

Features

  • Testing of the mudpumping effect on the track bed oft rain tracks
  • Simulation of a passing train with a speed of up to 300 km/h by generation of loads through an oscillation cylinder
  • Local recording and storage of the load-curve over long term tests (up to 500.000 cycles)

Technical “Key-Performance”-Parameters

  • Load-Curve: Adjustable ramp or sinus up to 10 Hz
  • Generation and control of loads up to 15 kN
  • Cylinder Stroke of max. 150 mm (or 5 mm at 10 Hz)
  • Kraftverlauf: Einstellbar Rampe oder Sinus bis 10 Hz
  • Tank volume: 200 l, Medium: HLP46

Break-Lifter test stand

pneumatic load control

Features

  • Load Control achieved by pneumatic cylinders
  • Testing of safety-relevant break-lifters for maximum load, nominal load, switching times, power consumption
  • Weight compensated test frame to increase the accuracy of the load measurement
  • Fully automated test run and test analysis

Technical “Key-Performance”-Parameters

  • Control medium: Pressurized Air
  • Control of the test load from 100 N - 12 kN
  • Speed control up to 500 mm/s
  • Position control over a range of 300 mm with +/- 0,05 mm accuracy

Components-Test stand

F1 KERS system

Features

  • R&D test stand for motorsport components
  • Testing of energy recovery modules
  • Test device conditioning
  • Temperature controlled test chamber
  • High Voltage resistant design
  • Execution in stainless steel

Technische “Key-Performance”-Parameter

  • Electric voltage testing up to 1500VDC
  • Electric current testing up to 500A
  • Testing temperature up to 150°C
  • Cooling power capacity of 10kW
  • Heating power capacity of 5kW

Test Stand for torsion of trucks

Features

  • Torsion of complete trucks with up to 5 axis by means of independant controllable cylinders
  • Load Absorption and movement of 10 x 30 tons
  • Rotation axis on the load platforms to enable steering with included fixation mechanism
  • Compact aggregate with included test stand control system and touch panel
  • TÜV certification

Technische “Key-Performance”-Parameter

  • Medium: Hydraulic oil, 300 l
  • Controllable cylinder movement for 5 individual cylinders simultaneously
  • Control of speed of cylinder movement from 0 – 15 mm/s
  • Control of cylinder position from 0 – 700 mm